Business Products & Services

Lessons Learned About

How to Find Hidden Piping and Valves

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.